Loading…

Science09.03

Ohm’s Law Calculator

Calculate voltage, current, resistance and power from any two values using Ohm’s law, with prefixes like mV, mA, kΩ and kW.

Back to Science

Fill in any two of the four fields and leave the other two blank.

This runs entirely in your browser. We don’t store any data.

Circuit

Voltage (V)
12 V
Current (I)
2 A
Resistance (R) · calculated
6 Ω
Power (P) · calculated
24 W

R = V ÷ I · P = V × I

How to use it

  1. 01

    Enter any two values: voltage and current, voltage and resistance, and so on.

  2. 02

    Pick the unit for each one (for example, mA for milliamps or kΩ for kilohms).

  3. 03

    You’ll see all four circuit values, each with the most readable prefix, along with the formulas used.

How it works

Ohm’s law says voltage equals current times resistance: V = I × R. Electrical power is voltage times current: P = V × I. Put the two together, and any two values give you the other two.

For example, P = V² ÷ R tells you how much power a resistor dissipates at a given voltage, and I = √(P ÷ R) gives you the current flowing through it.

These formulas apply to DC circuits and to purely resistive AC loads, like space heaters and incandescent bulbs. With motors and power supplies, the power factor also comes into play.

Examples

  • LED resistor

    With a 5 V supply and an LED that drops 2 V at 20 mA, the resistor has to handle the remaining 3 V: R = 3 V ÷ 0.02 A = 150 Ω.

  • Space heater

    A 1,500 W heater on a 120 V outlet draws 12.5 A and has a resistance of 9.6 Ω.

  • Car battery

    12 V and 2 A works out to 6 Ω and 24 W.

Frequently asked questions

What’s the difference between voltage, current and resistance?

Voltage (V) is the “pressure” that pushes electrons along, current (A) is how much charge flows each second, and resistance (Ω) is how strongly a material resists that flow.

Does it work for AC?

For resistive loads, yes, as long as you use RMS values (120 V in the US). With motors, transformers or switching power supplies, you also need to account for impedance and power factor.